现今，微小型元器件贴装已经成为SMT行业的趋势，针对吸嘴本身的精密度越来越高，针对吸嘴的维护保养也会成为左右贴装效果和针对吸嘴本身使用寿命的关键因素。维护保养包括很多方面：存放环境，针对吸嘴清洁等多方面。针对吸嘴保养好，贴装会持续稳定，针对吸嘴也可以一定程度上延长使用寿命。
我们在销售针对吸嘴的过程中，客户向我们咨询最多的是针对吸嘴的清洁保养，在这里，我们向您推荐最佳的清洁方式，希望能够对您在针对吸嘴保养上有所帮助。
Currently mini size component mounting has become the trend in SMT industry. The maintenance is very critical to the effect of mounting and the life span of the nozzle as the nozzle's precision is getting higher. There are many aspects included in maintenance such as storage environment, nozzle cleaning and etc. Mounting will be consistently stable and the nozzle's life span can be extended if the nozzle is well maintained.
During the distribution process most clients ask about the maintenance of nozzle. We are recommending the best way of cleaning hoping that it will be helpful for maintenance of the nozzle.
把针对吸嘴放置在载具上Put the nozzle on the carrier.
放置时，只有针对吸嘴头部露出载具。When putting the nozzle on the carrier, please make sure to leave the nozzle head out of the carrier.
使用超声波清洗机 超音波强度为38khzPlease use the Ultrasonic cleaner and the ultrasonic intensity should be adjusted to 38khz
倒入清水，把前端部分放置进去，用超声波清洗10分钟After pouring the clean water into the cleaner, put the front part into the cleaner. Then clean the nozzle for 10 minutes by using the Ultrasonic cleaner.
※不能接触到反光板
※用清水清洗不干净的情况下，请使用中性的清洁剂，效果明显。
清洗前Before
清洗后After
